Maxshine Heavy Cutting Compound – 16oz/500ml

Directions: Dispense a small amount of Maxshine’s cutting compound directly onto the pad. Working a small section(2'X2') at a time, until the compound starts to turn clear. Buff with slow back and forth overlapping motions until correction is complete. After sanding scratches are completely eliminated, wipe remaining residue with a MaxShine Microfiber Towel before moving on to the next section.

Warning:

Harmful if swallowed
Causes skin irritation
Causes serious eye irritation

Prevention:

Wash hands thoroughly after handling
Wear eye protection
Wear gloves
Keep away from heat/sparks/open flames/hot surfaces.–No smoking.

Tips:

• Polishes should be applied to small areas at a time
• Compounds do not need to dry before removing. In fact, should be wiped off immediately after working them over the finish. If they dry, it can be difficult to remove.
• Compounds remove everything off the surface of the paint including wax, so after using paint cleaner, Maxshine strongly recommends re-applying a protective coating of wax
• Wash pads thoroughly after use with warm soapy water and leave out to dry before storing.
• For ultimate results, clean pads frequently during use